Westinghouse ceiling fan Windsquare for suspended ceilings, with LED display and remote control
The small Westinghouse Windsquare ceiling fan is ideal for use at home or in commercial environments. Its slender dimensions make it a perfect match for false ceilings and a mounting frame is already included in the delivery.
The space should not be too humid or dusty though, because this device is not rated with a special ingress protection. It is mainly designed for presentation rooms such as offices or supermarkets. Its simple design and subtle white housing finish allow for discreet application on ceilings. The quiet Westinghouse premium motor does not interrupt any phone calls or confidential conversations with customers. Staff will also not be disturbed at work by unpleasant noise.
Manufacturer Westinghouse recommends a safety cable if the device is installed between the main concrete ceiling and lower suspended ceiling panels. The cable can be inserted through a pre-drilled hole on the sides of the fan.
The Windsquare fan is constructed for a clearance of 10cm between applied surface and main ceiling. The intergrated lead wire measures 12m.
- Suspended / false ceiling
- Home
- Office
- Commercial areas
- Extraction of air, e.g. kitchen
- Industrial environments
- Outdoors or partially covered outdoor area
- Near windows / inside windows
- Areas with explosive and flammable gas
Depending on the speed level the fan consumes between 46 and 52 Watts and reaches up to 1250 revolutions per minute. The SWING button on the included remote handset lets the fan grille rotate at 360 degrees. This reinforces circulation of air and ensures ideal air movement. The duration of operation is adjusted with the Timer setting which automatically turns the device off after 2, 4 or 6 hours.
The white housing is made of robust ABS plastic and is suitable for continuous operation at temperatures ranging from -40 to +85 °C. If any impurities caused by insects or dust are detected, you can simply remove the grill for cleaning purposes. Dirt on the blades can be removed with a soft, slightly damp cloth. Use only clear water without any chemical cleaning agents.
Facebook