Ventilation system TwinFresh Easy-D with remote

Dimensions and technical details

• 110-240 Volt ~ 50/60 Hertz
• Two single room ventilation systems with ceramic reservoir for heat recovery
• Housing colour: white
• Nominal size of duct: 160 mm
• Motor wattage: 2.37 / 3.8 / 7.61 W
• Current consumption: 0.033 / 0.047 / 0.08 A
• Revolutions per minute: 915 / 1555 / 2330
• Airflow rate ventilation mode: 15 / 30 / 50 m³/h
• Airflow rate recovery mode: 15 / 30 / 50 m³/h
• Sound pressure level Lp-3m: 12 / 18 / 20 dB(A)
• Sound pressure level Lp-1m: 21 / 27 / 29 dB(A)
• Permissible temperature range of air: -15°C to +40°C
• Heat recovery efficiency: ≤ 92%
• Protection code: IP24 splashing water protection
• Protection class: II
• Weight: 8 kg
• Front panel: 215 x 250 mm
• Outer hood: 215 x 250 mm
• Telescopic tube: Ø 160 mm x 250 - 500 mm
• Manual shutters
• Integral humidity sensor
• Includes G3 filter
• Includes remote control and wall control panel: 3 fan speeds / off, ventilation mode supply / extract, heat recovery, timer
• Heat recovery mode: two cycles alternate automatically every 70 seconds

1. Cycle I: Warm air is extracted from the room. The extracted air warms and dampens the heat storage vessel.
2. Cycle II: Fresh air flows through the heat accumulator, absorbing the stored heat and humidity until reaching room temperature.

Lead wire not included.